- 作者:
- 来源:
- 日期: 2019-01-14
- 浏览次数: 2954次
The ironing machine is a kind of washing machine and belongs to the washing and ironing equipment.The main components are usually single, two rollers (modern ironing machines may contain three rollers), and the rollers are rotated by hand or by electric power. The roller is heated by steam or electric. After reaching a certain temperature, when the clothes of the supermarket are rolled between the two rollers, a large amount of water can be discharged, and the effect of ironing is achieved, which is used for rolling sheets, tablecloths, cloths flat process.
The characteristics of the modern ironing machine is heated by a stainless steel drying cylinder, which has high heat dissipation efficiency and smooth surface, so that a better ironing effect can be obtained, and the ironing speed can be adjusted steplessly to achieve a silent effect. Adopt variable frequency speed control system, energy saving, college, and smooth. Use external steam heating or electric heating.
The working principle of the ironing machine: The ironing machine is driven by the motor to drive the inner cylinder through the belt shifting, and rotates forward and backward under the action of the timing controller, which drives the unsynchronized movement of the clothes and clothes, fabric and fabric, fabric Rubbing against the inner cylinder wall, etc., to achieve the purpose of cleaning.
The difference between single roller and double roller
There are single-roll ironing machine and double-roll ironing machine, as well as three-roll ironing machine. The automatic ironing machine for large-scale laundry equipment generally uses steam-heated ironing machine, and the electric heating ironing machine consumes too much electricity. Big, and the laundry room was originally based on low-cost competition, and the laundry room with too high cost could not stand the competition. The single-roll ironing machine is slow to flatten and is suitable for laundry with a small amount of work, private units. The ironing machine runs smoothly, with low noise and easy operation. Conveyor belt is not a special brand that is resistant to high temperature and anti-static. 2) The two-roll ironing machine has two kinds of steam heating and electric heating. Generally speaking, the laundry room uses a steam-heated ironing machine to save costs. The double-roll ironing machine adopts microcomputer control, frequency conversion speed regulation, large speed range and extremely convenient. The double-roll ironing machine adopts chain transmission, the transmission is accurate and reliable, and each transmission roller is a special cold-drawn tube to ensure the flatness of the woven fabric. The two-roll ironing machine runs smoothly, with low noise and simple operation. The conveyor belt is a special brand with high temperature resistance and anti-static.
A laundry room should be like work efficiency, no ironing machine is not enough, and the double roll ironing machine is faster than the single roll ironing machine. The three-roll ironing machine is faster and more efficient, of course, the price More expensive
Industrial ironing machine installation:
1, the industrial ironing machine installation has no special basic requirements, but the machine must be placed on a relatively flat concrete floor, and the front and rear left and right 1.5 meters operating position to drink maintenance position.
2. After the machine is installed, use a level to level the rollers.
3. When installing the machine, the inlet and outlet of the steam inlet and the drain pipe should be considered in advance.
4. The machine must be grounded during installation to avoid accidents.