- 作者:
- 来源:
- 日期: 2019-01-09
- 浏览次数: 895次
The ironing machine is a kind of laundry equipment. It is mainly used for ironing of sheets and quilt cover. The ironing machine is usually made of 800 stainless steel. The rest of the structural parts are made of galvanized or sprayed anti-corrosion treatment. The effective screed area utilization rate exceeds 85%. It is equipped with safety protection devices such as motor overload protection and emergency stop braking. The advanced differential design is adopted between each main ironing cylinder and the cloth, and the cloth is leveled to improve the quality of the ironing.
Reasons and solutions for the ironing machine ironing felt wear too fast
cause of issue:
1. The industrial ironing machine has more dirt on the groove surface and increased friction;
2. The exhaust capacity is reduced and the felt is wet;
3. Residual soaping agent erosion;
4. Drainage and drying before shutdown;
5. The cylinder back pressure is too large; increase wear
6. The spring fails and the elastic force is uneven;
7. The quality of the felt is not good.
Solution:
1, often clean the groove surface and wax, check and adjust the cleaning and rinsing process;
2, the same solution as above;
3, check the washing and cleaning process to ensure a PH value of 6.5-7;
4, stop and drain for 15-20 minutes as required;
5, adjust to reduce back pressure;
6, replace the new spring
7, replace the high-quality temperature-resistant wear-resistant ironing felt, such as contact us!
Thank you for reading and viewing, hope it can help you