- 作者:
- 来源:
- 日期: 2017-02-13
- 浏览次数: 1099次
1. Before the machine is turned on, check whether there is any debris in the feed port and whether the conveyor belt is normal.2. The laundry room is waxed with a clear wax cloth every day to prevent the surface of the ironing machine from blembling. The purpose of waxing is to smooth the surface of the ironing machine and prevent the wrinkles of the cloth from reducing the friction coefficient.
3. The ironing machine is damaged by the ironing tape, and the laundry room is replaced in time to ensure the output effect. 4. The laundry room pays attention to the various valves, instruments and ironing temperatures during work.
5. Before the machine is stopped, turn on the ironing machine for 20 minutes until the pressure gauge reads zero.
6. When leaving work, turn off the steam main valve and main power supply.
7. It was found that the abnormal phenomenon of the ironing machine was stopped in time and repaired.
8. Every week, the laundry room uses a fine wood emery cloth to polish the water and dirt accumulated on the inlet of the hot cylinder, keeping the feed opening smooth. Be careful to protect the relevant parts with old sheets before sanding to avoid soiling the hot sheets.
Contact for inquiry felt belt
