Flatwork Ironer Belt
Industrial Laundry Flatwork Ironer Belting
We offer a variety of drying ironer belts (also called Heated Cylinder Belts, ironer Ribbon) for all flatwork ironers:(Electrolux, Girbau, Primus, Alliance (Ipso), Chicago, sealion …)
We offer below types of ironer belts for laundry ironers:
1)* 50%Nomex+50%Polyester Laundry Ironer Belting 1500g/m2/5mmT
2)* 100%Nomex Belt 600g/m2/3~4mmT
3)* 100% Polyester Ironer Belt 1600g/m2/2mmT
4)* Woven Cotton Ironer Belt, For China flatwork Ironer Machine
Size 6” or 8” Width, can be supplied in roll form along with clips and pins or can be made up and ready to use.
We also provide below laundry machine Accessories:
1. Polyester/Nomex Guide Tape
Iron guide tape is an essential component for running your multi-roller machine at top efficiency. It is designed to guide damp linens from roll to roll smoothly and prevent any backups or snags.
We provide several types of flatwork ironer tape：
1)POLYESTER GUIDE TAPE, use the most
Size: 1/2" x 400 meter Roll, For Working Temperatures up to 170 Degrees C
2) FOR GAS OIL USE NOMEX GUIDE TAPE
Size: 1/2" x 400 meter Roll, For Working Temperatures up to 220 Degrees C
3)PPS/PET/PMIA GUIDE TAPE
Size: 15mm x 100 meters For high working temperature, durable, and China companies use more.
High-temperature resistance PPS laundry ironer guide tape
The main performance of the ironing guide belt:
1. Temperature resistance: above 200 ℃, breathable, heat resistant, long life
2. After being shaped at a high temperature, the felt belt will not elongate or shrink after being heated, and its size will be stable.
3. The card color joint at the interface is firm and does not break the head. 4. The felt belt does not deviate and does not break the edge
5. The felt belt is treated with static electricity, and there is no static electricity when using it.
2. Ironer Power Wax
The purpose of waxing is to keep the ironer chest lubricated and it should be done sparingly but often. Wax can be powder or paste. It is placed on the leading edge of the wax cloth, usually inside a pocket or barrier flap with a silicone coating. When the wax is fed through the ironer, the wax melts to coat and lubricate the ironer chests. This helps to get even heating from the chest to the linens and makes feeding from one roll to the next easier. If waxing is not done enough, or if it is done without enough wax, areas on the iron chest will become dry. These dry dead spots can grab onto the linen. If your linens jam or come out of the ironer with accordion wrinkles, then run a wax cloth to clean and lubricate the chests. The wax cloth should run through the ironer every TWO hours.
during the process of waxing, it is very important that the exhaust of the ironer is shut off to avoid the accumulation of wax vapors on the exhaust duct lines which later get condensed and start dripping down the line appearing as stain marks on the linens.
Waxing is done to remove the build-up of chemicals residual on the chest. Chemical residuals is accumulated on the chest during the process of passing linen. waxing should be done when the chest is warm(low temperature)
To get the best possible finishing on linen, it is essential to use waxing of the iron chest at regular intervals. we provide below the Ironer powder Wax used for the flatwork ironer:
*Hi-quality power wax for steam ironers
*Sizes available: 25Pound/barrel
3. Feed/Fold Belt For Laundry Machines
Woven Cotton Feed & Folder Belt are made from a Polyester/Cotton blend and are suitable for all classifications. Belting has been specifically designed for feeders and can be supplied in roll form along with clips and pins or can be made up and ready to use.
4. Steel Padding (Springs) For Steam Press Machine
laundry ironer spring padding for 3300mmW Ironer, 500meters, weight 50KGS,
The outer barrel of the barrel inside is about 600mm in diameter and about 800mm in height.
5. Belt fastener/Clipper /Belt fastener Tool/Vise
Wire Hook Fastening System is designed with a variety of different wire diameters, leg and point lengths, metals, strip lengths, and styles to meet your individual application needs. which is the same usage as Flexco.
Email info@amisfelting.com for further details. Tool Video please check link: Google+
6. Laundry pressing machine use pads (silicon pads, felt)
Below Flat Work, Ironer Brands use our Ironer padding & Belting
