- 作者: Emily
- 来源: Amisfeltin
- 日期: 2021-09-02
- 浏览次数: 522次
Why your Flatwork ironer machine ironer felt wears out so fast?1. The groove surface of the industrial ironing machine has a lot of dirt and increased friction
2. The exhaust steam capacity is reduced, and the felt is damp
3. Corrosion of residual soap agent
4. Dehumidification and drying before shutdown
5. Excessive cylinder backpressure increases wear
6. The spring fails and the elasticity is uneven
7. The quality of the felt is not good
Check above, your machines have those problems?
How to solve those problems ???
1. Frequently clean and wax the tank surface, check and adjust the cleaning and rinsing process
2. Same as the previous solution
3. Check the washing and cleaning process of the ironing machine to ensure that the PH value is 6.5-7
4. Shut down as required to dehumidify for 15-20 minutes
5. Adjust to reduce back pressure
6. Replace with new spring
7. Replace high-quality heat-resistant and wear-resistant ironing felt
#laundry
#flatworkironer
#ironerfelt
#machine
#laundryequipment
#IndustrialLaundry