- 作者:
- 来源: Amisfeltin
- 日期: 2021-03-24
- 浏览次数: 538次
Reasons for the conveyor belt to run off1. The belt quality is not good
The conveyor belt equipped with the machine is of poor quality, uneven direction force, belt quality problems cause inconsistent elongation under tension and belt deviation. Therefore, the equipment and conveyor belt must be regularly checked and adjusted. Jinan An Nai Gao must be selected. Quality conveyor belt.
2. Misplaced installation
The center of the idler group is not right or the axis of the idler group is not perpendicular to the center line of the belt, and the direction of belt deviation is the same as the inclination direction of the idler group. In order to prevent belt deviation, the idler must be installed straight.
3. Adjust the position of the driving roller and the reversing roller
The adjustment of the driving roller and the reversing roller is an important part of the belt deviation adjustment. A belt conveyor has 2 to 5 rollers. The installation position of all the rollers must be perpendicular to the center line of the belt conveyor. If the deviation is too large, it will inevitably deviate.
4. The idler does not rotate, the surface of the roller is not round or the bearing is damaged
It can cause the belt to start to deviate locally at the roller. The uneven surface of the roller can also cause the belt to deviate due to coal adhesion. Therefore, the running condition of the roller should be strengthened, the maintenance should be strengthened, and the surface should be cleaned frequently, if necessary. Replace with a new roller.
5. Problems when the belt is glued
The interface is not perpendicular to the centerline of the belt, which causes deviation at the joint. Jinan An Nai provides pin buckle, spike buckle, butterfly buckle, and other interfaces.
Combining the upper leather belt with the reasons for the deviation needs to be solved in a targeted manner.
Contact us if need conveyor belt and belt fastener info@amisfelting.com