- 作者: Emily
- 来源:
- 日期: 2021-03-04
- 浏览次数: 393次
The ironing machine is a kind of washing machine, which belongs to the laundry room ironing equipment. The main components are generally single or two rollers (modern ironing machines may contain three rollers), the rollers are rotated by hand or by electricity. The roller is heated by steam or electricity. After reaching a certain temperature, when the wet clothes are rolled between the two rollers, a large amount of water can be removed and the effect of ironing can be achieved. It is used for bed sheets, tablecloths, cloth, etc. Rolling process.Basic Features
1. The stainless steel drying cylinder is used for heating, and the heat dissipation efficiency is high, and the surface is smooth and smooth, so as to obtain a better ironing effect.
2. The ironing speed is steplessly adjusted to achieve a silent effect.
3. The frequency conversion speed regulation system is adopted, which is energy-saving, efficient, and stable.
4. Use external steam heating or electric heating.
installation method
1. There are no special foundation requirements for the ironing machine installation, but the machine must be placed on a relatively flat concrete floor, and the operating position and maintenance position of 1.5 meters in the front, back, left, and right must be retained.
2. After the machine is installed, please level the roller with a spirit level.
3. When installing the machine, the entrance and exit of its steam inlet and drainage pipes should be considered in advance.
4. The machine must be grounded during installation to avoid accidents.