- 作者:
- 来源:
- 日期: 2019-08-28
- 浏览次数: 525次
The most troublesome problem for the painter is that the paint is accidentally applied to the overalls.The paint is dry, hardened and oxidized in the air, and it is difficult to clean the stains after a while. How do you deal with the newly stained clothing and stained paint stains that have been left unwashed for a long time?
We can put the newly painted clothes into the industrial washing machine, add hot water, add the appropriate banana water, dissolve the pine perfume, and wash for 20 minutes.
If it is a stained clothing that has not been cleaned for a long time, you can use glycerin and banana water, dissolve the pine perfume, finally add gasoline and detergent to dissolve, then add washing powder, and finally put it into the industrial washing machine for cleaning.
In the mechanical workshop, there are rust stains and mechanical oil stains everywhere, and workers will inevitably get these stains. It is relatively simple to clean these stains with industrial washing machines in water washing plant equipment.
The first is iron stains. If you use an industrial washing machine, you should first add 50% oxalic acid aqueous solution to the laundry equipment. The water temperature is generally controlled at about 40 degrees. It can be dehydrated after washing for 15 minutes, and it is good to use the dryer after dehydration.
Mechanical oil is not well cleaned. This kind of oil stain is generally recommended to be partially treated first. First use dry cleaning, anhydrous ethanol, gasoline to wipe it, then wash it with super-energy soap. After washing, it can be put into industrial washing machine for cleaning.
Grasping the washing time of industrial washing machines will also capture the cost. How to save the washing time of industrial washing machines?
The first is that industrial washing machines must choose a low water level when adding water. The low water level helps to reduce the waste of water resources. The time for washing is about 10 minutes.
Secondly, the time is off, the time of the industrial washing machine should not be too long, about 3 minutes, and then directly on the high off for 5 minutes, so the cloth will be dry.
Finally, it is rinsed, and the high water level is selected once and rinsed. After washing for 2 minutes, it can be lifted off. The other time is the same as the washing process. The entire washing process was 45 minutes.