- 作者:
- 来源:
- 日期: 2019-08-15
- 浏览次数: 1923次
The chest ironing machine is a type of flat machine. The reason why it is called "slot type" is mainly because its heating part is different from the roller type ironing machine. It heats the cloth by the parts that are outsourced to the drum. The heating part has a C-shaped cross section. Much like a sink for drinking horses.The chest ironing machine has many technical features different from the roll type ironing machine due to changes in its heating elements. In order to meet the upcoming launch of Shenguang's new product trough ironing machine, in order to help everyone understand the chest ironing machine in time, the technical characteristics and comparative advantages of the chest ironing machine are arranged as follows for your reference.
First, the comparative advantage
1, the quality of ironing is good
The screeding principle of the chest ironing pressing machine is: rolling the cloth through the felt wrapped on the drum, rubbing it over the smooth and hot heating tank, and the hot groove evaporates the water in the cloth, smoothing the groove Smooth the cloth. The frictional sliding between the cloth and the heating tank is very similar to the frictional sliding between the iron and the laundry. The roller ironing machine does not have a similar frictional slip. This is an important reason why the screed quality of the trough ironing machine is significantly better than that of the roller type.
2, high flat speed
The drum dehumidifier of the chest ironing machine can forcibly discharge the water vapor evaporated by the cloth, which greatly enhances the ironing efficiency of the cloth; and the steam pressure of the ironing tank is generally higher than that of the roller ironing machine, The higher temperature is also conducive to the ironing of the linen. Therefore, the chest ironing machine has a flattening speed that is more than twice that of the roller ironing machine.
3. The machine has good heat insulation and high heat utilization rate.
Unlike the roller type ironing machine, the heating drum is rotated. The heating tank of the trough type ironing machine is a relatively static component. It is easy to heat insulation, so the heat loss of the machine is less, which not only improves the machine. The heat utilization efficiency and the thermal pollution to the laundry room are also greatly reduced.
4, steam pipe connection is simple and reliable
The heating roller of the roller ironing machine is a rotating component that must be connected to the steam pipe through a dynamic sealing joint. This brings about problems such as sealing reliability and hydrophobic smoothness. The relative static of the trough-type ironing machine heating tank avoids the above problems, and the steam pipe connection is simple and reliable.
Second, the relative deficiency
1. The machine is expensive and the cost of use is high.
The chest ironing machine itself is self-contained, and the cost of the large hot tank, spring coil, felt, high-power reducer and other matching parts is high, so the machine price is relatively expensive. In the process of using the machine, it is necessary to keep the hot groove smooth, and it needs to be waxed frequently; the mechanical driving power of the machine is large, so the subsequent use cost is relatively high.
2, requires high steam pressure
To ensure the normal and efficient operation of the chest ironing machine, it is necessary to maintain a supply of pressure steam of 0.6~0.9MPa.
Article from http://www.chinasaner.com/show.asp?id=303