- 作者:
- 来源:
- 日期: 2017-11-04
- 浏览次数: 1033次
Some tips By Al Adcock, B&C Technologies for Maintaining Laundry Equipment:Commercial Ironers
• Inspect drive chains and lubricate.
• Replace worn sprockets and chain.
• Lubricate bearings.
• Inspect feeding and ironing belts and guide tapes. Replace if needed.
• Clean exhaust system and remove as much lint as possible.
Commercial Flatwork Feeders and Folders
• Inspect all mechanical drives (flat belts, round belts, etc.) for wear. Replace if necessary.
• Lubricate bearings
• Inspect feeding and folding belts. Replace missing or damaged belts.
• Check pneumatic lines for contaminates like water or other debris. Clean or replace these lines.
• Drain air filter/accumulator and replace the filter with a new element.
